AnonymousFox

//scripts/cpuser_port_authority

#!/usr/local/cpanel/3rdparty/bin/perl

# cpanel - scripts/cpuser_port_authority           Copyright 2022 cPanel, L.L.C.
#                                                           All rights reserved.
# copyright@cpanel.net                                         http://cpanel.net
# This code is subject to the cPanel license. Unauthorized copying is prohibited

use strict;
use warnings;

package scripts::cpuser_port_authority;

use Cpanel::JSON                    ();
use Cpanel::Transaction::File::JSON ();
use Cpanel::Config::LoadUserDomains ();
use Cpanel::Debug                   ();
use Cpanel::Validate::Username      ();
use Cpanel::FileUtils::Write        ();
use Cpanel::PwCache                 ();

our $port_authority_conf = "/etc/cpanel/cpuser_port_authority.json";

my $cmds = {
    give => {
        code     => \&give,
        clue     => "give <user> <number of ports> [--service=my_app]",
        abstract => 'Give a user 1 or more ports.',
        help     => "Give a user 1 or more ports, that only they can run a service on.\n  --service=<NAME>  this will tie a service name, as appropriate for scripts/cpuser_service_manager, to the ports for reference",
    },
    take => {
        code     => \&take,
        clue     => "take <user> <port-number> [<port-number> <port-number> …]",
        abstract => "Take 1 or more ports from a user.",
        help     => "Take 1 or more ports from a user. Errors out completely if any of the given ports do not belong to them.",
    },
    list => {
        code     => \&list,
        clue     => "list [<user>]",
        abstract => "List port assignment information.",
        help     => "List port assignment information. If given a user it lists only that user’s information. The output is in human friendly JSON format.",
    },
    fw => {
        code     => \&fw,
        clue     => "fw",
        abstract => "Setup Firewall",
        help     => "Setup the firewall rules to match the configured port assignments",
    },
    user => {
        code     => \&user,
        clue     => "user (remove|change) <user> [<new_user>]",
        abstract => "Operate on a given user’s port assignments",
        help     => "Remove all ports owned by the given user. Change port ownership from <user> to <new_user>.",
    },
};

my $hint_blurb = "Usage: `$0 {command} …`.\n\tThis tool supports the following commands:";
my $opts       = {
    'help:pre_hint'  => $hint_blurb,
    'help:pre_help'  => "Various user-assigned-port related admin utilities\n\n$hint_blurb",
    default_commands => "help",
    alias            => { free => "take", firewall => "fw" },
};

run(@ARGV) if !caller;

sub run {
    my (@argv) = @_;
    die "This script should only be called as root\n" if $> != 0;

local $ENV{TERM} = $ENV{TERM} || "xterm-256color";    # non-CLI modulino avoid needless: Cannot find termcap: TERM not set at …/Term/ReadLine.pm line 373.
    require App::CmdDispatch;
    import App::CmdDispatch;

# need to have App::CmdDispatch do this automatically see CPANEL-22328
    if ( @argv && grep { defined && m/\A\-\-help\z/ } @argv ) {
        App::CmdDispatch->new( $cmds, $opts )->help();
        exit(0);
    }

my $orig_command_hint = \&App::CmdDispatch::command_hint;
    no warnings "redefine";
    local *App::CmdDispatch::command_hint = sub {
        $orig_command_hint->(@_);
        exit(1);
    };
    no warnings 'once';
    require App::CmdDispatch::IO;
    local *App::CmdDispatch::IO::print = sub {
        shift;
        if ( ref($@) && $@ =~ m/^App::CmdDispatch::Exception/ ) {
            CORE::print STDERR @_;
            return;
        }
        CORE::print(@_);
        return;
    };
    local *App::CmdDispatch::MinimalIO::print = \&App::CmdDispatch::IO::print;
    use warnings 'once';

# ^^^ /need to have App::CmdDispatch do this automatically see CPANEL-22328

if ( $ARGV[0] && $ARGV[0] eq 'help' ) {
        require Cpanel::Services::Firewall;
        if ( Cpanel::Services::Firewall::is_firewalld() ) {
            $opts->{'help:post_help'} = _get_firewalld_caveat();
        }
    }

my $app = App::CmdDispatch->new( $cmds, $opts );
    if ( ref( $app->{io} ) eq "1" ) {    # To work around https://rt.cpan.org/Ticket/Display.html?id=132309
        $app->{io} = bless {}, "App::CmdDispatch::MinimalIO";
    }
    return $app->run(@argv);
}

################
#### commands ##
################

sub give {
    my ( $app, $user, $count, @flags ) = @_;
    _validate_user_arg( $app, $user );

if ( !defined $count || $count !~ m/^[1-9][0-9]*$/ ) {
        _bail( $app, "The number of ports you want assigned must be a whole number greater than 0." );
    }

my @ports = _get_next_n_ports($count);          # dies if it can't get $count ports
    _add_conf( $app, $user => \@ports, @flags );    # dies if port is already assigned (i.e. raced from _get_next_n_ports()), dies if it can’t save

for my $port (@ports) {
        print "$port\n";
    }

_setup_firewall();
    return;
}

sub take {
    my ( $app, $user, @ports ) = @_;
    _validate_user_arg( $app, $user );

die "No ports given.\n" if !@ports;

my $transaction = Cpanel::Transaction::File::JSON->new(
        path        => $port_authority_conf,
        permissions => 0640,
    );

my $data = $transaction->get_data();
    my $hr   = ref($data) eq 'HASH' ? $data : {};

for my $port (@ports) {
        if ( !defined $port || $port !~ m/^[1-9][0-9]*$/ ) {
            die "Invalid port.\n";
        }
        elsif ( !exists $hr->{$port} ) {
            die "“$port” is not assigned.\n";
        }
        elsif ( $hr->{$port}{owner} ne $user ) {
            die "“$port” is not owned by “$user”.\n";
        }
        else {
            delete $hr->{$port};
        }
    }

$transaction->set_data($hr);
    _write_transaction($transaction);
    _setup_firewall();
    return;
}

sub user {
    my ( $app, $action, $user, $new_user ) = @_;

die "invalid action for `user` subcommand\n" if !defined $action || ( $action ne "remove" && $action ne "change" );

# This function is used in 2 ways, from the command line where multiple actions are
    # allowed.   And from the Task processor, where it is in reaction to a modify account.
    # In the latter case, the action will be "change", and the original user will have
    # already been changed to new_user, and is no longer valid.

if (   $action eq "change"
        && defined $user
        && defined $new_user
        && Cpanel::Validate::Username::user_exists($new_user)
        && !Cpanel::Validate::Username::user_exists($user) ) {
        _validate_user_arg( $app, $new_user );
    }
    else {
        _validate_user_arg( $app, $user );
    }

if ( $action eq "change" ) {
        die "New username is not valid.\n" if !defined $new_user || !Cpanel::Validate::Username::is_strictly_valid($new_user);
        die "Too many arguments.\n"        if @_ > 4;
    }
    else {
        die "Too many arguments.\n" if @_ > 3;
    }

my $transaction = Cpanel::Transaction::File::JSON->new(
        path        => $port_authority_conf,
        permissions => 0640,
    );

my $data = $transaction->get_data();
    my $hr   = ref($data) eq 'HASH' ? $data : {};

my $count = 0;
    for my $port ( sort keys %{$hr} ) {
        if ( $hr->{$port}{owner} eq $user ) {
            $count++;
            if ( $action eq "change" ) {
                $hr->{$port}{owner} = $new_user;
            }
            else {
                delete $hr->{$port};
            }
        }
    }

if ($count) {
        $transaction->set_data($hr);
        _write_transaction($transaction);
        _setup_firewall();
    }
    else {
        eval { $transaction->close_or_die; };
        warn $@ if $@;
    }

print "", ( $action eq "change" ? "Updated" : "Removed" ), ": $count\n";
    return;
}

sub list {
    my ( $app, $user ) = @_;

my $hr = eval { Cpanel::JSON::LoadFile($port_authority_conf) } || {};

if ( $user || @_ == 2 ) {
        _validate_user_arg( $app, $user );

for my $port ( keys %{$hr} ) {
            delete $hr->{$port} if $hr->{$port}{owner} ne $user;
        }
    }

print Cpanel::JSON::pretty_canonical_dump($hr);

return;
}

sub fw {
    _setup_firewall();
    return;
}

##############################
#### used by task processor ##
##############################

sub call_ubic {
    my ( $user, @args ) = @_;

my $curhome = Cpanel::PwCache::gethomedir($user);
    if ( -s "$curhome/.ubic.cfg" ) {
        require Cpanel::AccessIds;
        Cpanel::AccessIds::do_as_user_with_exception(
            $user,
            sub {
                local $ENV{HOME} = $curhome;

# would be cool if Cpanel::FindBin (or whatever) did this for us: CPANEL-22345 and CPANEL-23118
                my $real_perl  = readlink("/usr/local/cpanel/3rdparty/bin/perl");
                my $cp_bin_dir = $real_perl;
                $cp_bin_dir =~ s{/perl$}{};
                local $ENV{PATH} = "$cp_bin_dir:$ENV{PATH}";    # not only does this allow it to find our ubic-admin, it allows its env-shebang to pick up our perl

system( "ubic", @args );
            }
        );
    }

return;
}

sub update_ubic_conf {
    my ( $user, $orig_user ) = @_;

my $newhome = Cpanel::PwCache::gethomedir($user);
    die "Invalid new username\n" if ( !$newhome || !-d $newhome );

my $ubic_note     = "IMPORTANT = Do not edit this cPanel User Service Manager generated file!";    # from scripts/cpuser_service_manager, DO NOT prepend a '#'
    my $ubic_cnf_path = "$newhome/.ubic.cfg";

if ( -s $ubic_cnf_path ) {
        require Cpanel::LoadFile;
        require Cpanel::AccessIds;
        Cpanel::AccessIds::do_as_user_with_exception(
            $user,
            sub {
                my $had_ubic_note = 0;
                my $new_ubic      = "";
                for my $line ( split( /\n/, Cpanel::LoadFile::load($ubic_cnf_path) ) ) {
                    if ( $line =~ m/^\s*data_dir\s*=/ ) {
                        $new_ubic .= "data_dir = $newhome/ubic/data\n";
                    }
                    elsif ( $line =~ m/^\s*default_user\s*=/ ) {
                        $new_ubic .= "default_user = $user\n";
                    }
                    elsif ( $line =~ m/^\s*service_dir\s*=/ ) {
                        $new_ubic .= "service_dir = $newhome/ubic/service\n";
                    }
                    elsif ( $line eq $ubic_note ) {
                        $had_ubic_note++;
                        $new_ubic .= "$ubic_note\n";
                    }
                    else {
                        if ( $line ne "" ) {
                            warn "Custom line in $ubic_cnf_path may be incorrect:\n\t(Line: '$line')\n";

# could modify it but you get into a rats nest:
                            #   e.g. change homedir then username:
                            #     what happens when old name is foo and the new name if foo1:
                            #        /home/foo becomes /home/foo1
                            #        /home/foo1 becomes  /home/foo11
                            #   e.g. change username then homedir
                            #     what happens when old name is bar and the new homedir is /home2/bart
                            #     /home/bar becomes /home/bart
                            #     /home/bart becomes /home2/bartt
                            # they really shouldn't be editing this file anyway ¯\_(ツ)_/¯
                        }

$new_ubic .= "$line\n";
                    }
                }

if ( !$had_ubic_note ) {
                    $new_ubic = "$ubic_note\n$new_ubic";
                }

Cpanel::FileUtils::Write::overwrite( $ubic_cnf_path, $new_ubic );

my $ubic_update_service   = $newhome . "/ubic/service/ubic/update";
                my $ubic_watchdog_service = $newhome . "/ubic/service/ubic/watchdog";

foreach my $file ( $ubic_update_service, $ubic_watchdog_service ) {
                    if ( -e $file ) {
                        my $new_ubic      = "";
                        my $did_something = 0;
                        for my $line ( split( /\n/, Cpanel::LoadFile::load($file) ) ) {
                            my $working = $line;
                            if ( $working =~ m:'--stdout=/.+?/$orig_user/.*': ) {
                                $working =~ s:(--stdout=/.+?)/$orig_user/:$1/$user/:;
                            }
                            if ( $working =~ m:'--stderr=/.+?/$orig_user/.*': ) {
                                $working =~ s:(--stderr=/.+?)/$orig_user/:$1/$user/:;
                            }
                            $new_ubic .= $working;
                        }

Cpanel::FileUtils::Write::overwrite( $file, $new_ubic );
                    }
                }
            }
        );
    }

return;
}

###############
#### helpers ##
###############

sub _setup_firewall {

require Cpanel::Services::Firewall;
    if ( Cpanel::Services::Firewall::is_firewalld() ) {
        warn _get_firewalld_caveat() . "\n";
    }

print "Setting up firewall …\n";

require Capture::Tiny;
    my ( $out, $rv ) = Capture::Tiny::capture_merged( \&Cpanel::Services::Firewall::setup_firewall );

if ($rv) {    # setup_firewall() RV is suitable for exit($rv||0)
        warn "Firewall setup reported a problem. Please run /usr/local/cpanel/scripts/configure_firewall_for_cpanel to ensure the firewall is OK.\n";
        return;
    }
    else {
        print " … done.\n";
    }

return 1;
}

sub _validate_user_arg {
    my ( $app, $user ) = @_;

_bail( $app, "The user argument is missing." ) if !$user;

if ( $user ne "root" ) {
        my $user_lookup = Cpanel::Config::LoadUserDomains::loaduserdomains( undef, 0, 1 );
        _bail( $app, "The given user is not a cPanel user.\n" ) if !$user_lookup->{$user};
    }

return 1;
}

sub _get_next_n_ports {
    my ($n) = @_;

my ( $bottom_min, $bottom_max, $top_min, $top_max ) = _get_port_ranges();
    my $port;    # buffer

my @ports;
    for $port ( $bottom_min .. $bottom_max ) {
        push @ports, $port if !_is_port_assigned($port);
        last if @ports == $n;
    }

return @ports if @ports == $n;

if ( defined $top_min ) {
        for $port ( $top_min .. $top_max ) {
            push @ports, $port if !_is_port_assigned($port);
            last if @ports == $n;
        }
    }

die "Not enough free ports (wanted $n)\n" if @ports != $n;
    return @ports;
}

my $lookup_cache;

sub _add_conf {
    my ( $app, $user, $ports, @flags ) = @_;

# There is an old unused system (to be deprecated/removed via CPANEL-22447) that uses
    #    /var/cpanel/portassignments.db (YAML) && /etc/portassignments (key: value version of the .db file …)
    # We could import those here if they exist but probably YAGNI.

my $service;
    for my $flag (@flags) {
        if ( defined $flag && $flag =~ m/^\-\-service/ ) {
            $service = $flag;
            $service =~ s/^\-\-service//;
            $service =~ s/^=//;                              # do this sperately in case they just pass `--service` or `--service=`
            if ( $service !~ m/^[\w-]+(?:\.[\w-]+)*$/ ) {    # regexp is $service_name_re from Ubic.pm v1.60
                _bail( $app, "Invalid service name" );
            }
        }
    }

my $transaction = Cpanel::Transaction::File::JSON->new(
        path        => $port_authority_conf,
        permissions => 0640,
    );

my $data = $transaction->get_data();
    my $hr   = ref($data) eq 'HASH' ? $data : {};

for my $port ( @{$ports} ) {
        die "port “$port” already assigned (is someone else logged in as root and running this script?)\n" if exists $hr->{$port};
        $hr->{$port} = { owner => $user };
        $hr->{$port}{service} = $service if $service;
    }

$transaction->set_data($hr);
    _write_transaction($transaction);

return;
}

sub _write_transaction {
    my ($transaction) = @_;

eval {
        $transaction->save_pretty_canonical_or_die();
        $transaction->close_or_die();
    };
    warn $@ if $@;

$lookup_cache = undef;

return;
}

sub _get_cmd {
    return $cmds;
}

sub _bail {
    my ( $app, $msg ) = @_;
    chomp($msg);

# !$app for task processor
    die "$msg\n" if $ENV{ __PACKAGE__ . "::bail_die" } || !$app;    # for API calls, otherwise:

warn "$msg\n";
    $app->help();

# there is no return()ing from this lol
    exit(1);                                                        ## no critic qw(Cpanel::NoExitsFromSubroutines) the refactor here is risky
}

sub _is_port_assigned {
    my ($port) = @_;

if ( !$lookup_cache ) {
        $lookup_cache = eval { Cpanel::JSON::LoadFile($port_authority_conf) } || {};
    }

return exists $lookup_cache->{$port};
}

my ( $bottom_min, $bottom_max, $top_min, $top_max );

sub _get_port_ranges {
    if ( !defined $bottom_min ) {

# even if FTP is disabled ATM, it could be re-enabled (¿TODO/YAGNI? only factor these in if FTP is currently enabled
        my ( $passive_ftp_start, $passive_ftp_end ) = ( 49_152, 65_534 );

no warnings "redefine";
        local *Cpanel::Debug::log_warn = sub { };    # facepalm …
        require Cpanel::FtpUtils::Config;
        my $ftp_conf          = Cpanel::FtpUtils::Config->new->get_config;
        my $ftp_passive_range = $ftp_conf->{PassivePortRange} || $ftp_conf->{PassivePorts};
        if ($ftp_passive_range) {
            ( $passive_ftp_start, $passive_ftp_end ) = split( /\s+/, $ftp_passive_range );
        }

my ( $ephemeral_start, $ephemeral_end ) = ( 49_152, 65_535 );    # IANA defaults

require File::stat;
        if ( File::stat::stat("/proc/sys/net/ipv4/ip_local_port_range") ) {
            require Path::Tiny;
            my $ip_local_port_range_raw = Path::Tiny::path("/proc/sys/net/ipv4/ip_local_port_range")->slurp;
            chomp($ip_local_port_range_raw);
            ( $ephemeral_start, $ephemeral_end ) = split( /\s+/, $ip_local_port_range_raw );

if ( $ephemeral_start > $passive_ftp_start ) {
                $ephemeral_start = $passive_ftp_start;
            }

if ( $ephemeral_end < $passive_ftp_end ) {
                $ephemeral_end = $passive_ftp_end;
            }
        }

$ephemeral_start = 10_001               if $ephemeral_start < 10_001;
        $ephemeral_end   = $ephemeral_start + 1 if $ephemeral_end < $ephemeral_start;

( $bottom_min, $bottom_max, $top_min, $top_max ) = ( 10_000 => ( $ephemeral_start - 1 ), ( $ephemeral_end + 1 ) => 65535 );

if ( $ephemeral_end >= 65535 ) {
            ( $top_min, $top_max ) = ( undef, undef );
        }
    }

return ( $bottom_min, $bottom_max, $top_min, $top_max );
}

sub _silent_sys {
    my (@sys) = @_;
    require Capture::Tiny;
    my ( $out, $exit ) = Capture::Tiny::capture_merged( sub { system(@sys) } );
    die "`@sys` exited unclean ($exit)\n" if $exit;    #TODO/YAGNI: output $out if --verbose
    return;
}

sub _get_firewalld_caveat {

my $message = <<"END_FIREWALLD";
ℹ️  [Caveat] Currently, firewalld does not respect port ownership assignments.

To enforce port ownership, you must use iptables tables instead.

We will update this system when the functionality is available.
END_FIREWALLD

require Cpanel::Output::Formatted::Terminal;
    return Cpanel::Output::Formatted::Terminal->new->format_message( "bold black on_blue" => $message );
}