AnonymousFox

//usr/share/perl5/pod/perlmodstyle.pod

=head1 NAME

perlmodstyle - Perl module style guide

=head1 INTRODUCTION

This document attempts to describe the Perl Community's "best practice"
for writing Perl modules.  It extends the recommendations found in 
L<perlstyle> , which should be considered required reading
before reading this document.

While this document is intended to be useful to all module authors, it is
particularly aimed at authors who wish to publish their modules on CPAN.

The focus is on elements of style which are visible to the users of a 
module, rather than those parts which are only seen by the module's 
developers.  However, many of the guidelines presented in this document
can be extrapolated and applied successfully to a module's internals.

This document differs from L<perlnewmod> in that it is a style guide
rather than a tutorial on creating CPAN modules.  It provides a
checklist against which modules can be compared to determine whether
they conform to best practice, without necessarily describing in detail
how to achieve this.

All the advice contained in this document has been gleaned from
extensive conversations with experienced CPAN authors and users.  Every
piece of advice given here is the result of previous mistakes.  This
information is here to help you avoid the same mistakes and the extra
work that would inevitably be required to fix them.

The first section of this document provides an itemized checklist; 
subsequent sections provide a more detailed discussion of the items on 
the list.  The final section, "Common Pitfalls", describes some of the 
most popular mistakes made by CPAN authors.

=head1 QUICK CHECKLIST

For more detail on each item in this checklist, see below.

=head2 Before you start

=over 4

=item *

Don't re-invent the wheel

=item *

Patch, extend or subclass an existing module where possible

=item *

Do one thing and do it well

=item *

Choose an appropriate name

=item *

Get feedback before publishing

=back

=head2 The API

=over 4

=item *

API should be understandable by the average programmer

=item *

Simple methods for simple tasks

=item *

Separate functionality from output

=item *

Consistent naming of subroutines or methods

=item *

Use named parameters (a hash or hashref) when there are more than two
parameters

=back

=head2 Stability

=over 4

=item *

Ensure your module works under C<use strict> and C<-w>

=item *

Stable modules should maintain backwards compatibility

=back

=head2 Documentation

=over 4

=item *

Write documentation in POD

=item *

Document purpose, scope and target applications

=item *

Document each publically accessible method or subroutine, including params and return values

=item *

Give examples of use in your documentation

=item *

Provide a README file and perhaps also release notes, changelog, etc

=item *

Provide links to further information (URL, email)

=back

=head2 Release considerations

=over 4

=item *

Specify pre-requisites in Makefile.PL or Build.PL

=item *

Specify Perl version requirements with C<use>

=item *

Include tests with your module

=item *

Choose a sensible and consistent version numbering scheme (X.YY is the common Perl module numbering scheme)

=item *

Increment the version number for every change, no matter how small

=item *

Package the module using "make dist"

=item *

Choose an appropriate license (GPL/Artistic is a good default)

=back

=head1 BEFORE YOU START WRITING A MODULE

Try not to launch headlong into developing your module without spending
some time thinking first.  A little forethought may save you a vast
amount of effort later on.

=head2 Has it been done before?

You may not even need to write the module.  Check whether it's already 
been done in Perl, and avoid re-inventing the wheel unless you have a 
good reason.

Good places to look for pre-existing modules include
L<MetaCPAN|https://metacpan.org> and L<PrePAN|http://prepan.org>
and asking on C<module-authors@perl.org>
(L<https://lists.perl.org/list/module-authors.html>).

If an existing module B<almost> does what you want, consider writing a
patch, writing a subclass, or otherwise extending the existing module
rather than rewriting it.

=head2 Do one thing and do it well

At the risk of stating the obvious, modules are intended to be modular.
A Perl developer should be able to use modules to put together the
building blocks of their application.  However, it's important that the
blocks are the right shape, and that the developer shouldn't have to use
a big block when all they need is a small one.

Your module should have a clearly defined scope which is no longer than
a single sentence.  Can your module be broken down into a family of
related modules?

Bad example:

"FooBar.pm provides an implementation of the FOO protocol and the
related BAR standard."

Good example:

"Foo.pm provides an implementation of the FOO protocol.  Bar.pm
implements the related BAR protocol."

This means that if a developer only needs a module for the BAR standard,
they should not be forced to install libraries for FOO as well.

=head2 What's in a name?

Make sure you choose an appropriate name for your module early on.  This
will help people find and remember your module, and make programming
with your module more intuitive.

When naming your module, consider the following:

=over 4

=item *

Be descriptive (i.e. accurately describes the purpose of the module).

=item *

Be consistent with existing modules.

=item *

Reflect the functionality of the module, not the implementation.

=item *

Avoid starting a new top-level hierarchy, especially if a suitable
hierarchy already exists under which you could place your module.

=back

=head2 Get feedback before publishing

If you have never uploaded a module to CPAN before (and even if you have),
you are strongly encouraged to get feedback on L<PrePAN|http://prepan.org>.
PrePAN is a site dedicated to discussing ideas for CPAN modules with other
Perl developers and is a great resource for new (and experienced) Perl
developers.

You should also try to get feedback from people who are already familiar
with the module's application domain and the CPAN naming system.  Authors
of similar modules, or modules with similar names, may be a good place to
start, as are community sites like L<Perl Monks|https://www.perlmonks.org>.

=head1 DESIGNING AND WRITING YOUR MODULE

Considerations for module design and coding:

=head2 To OO or not to OO?

Your module may be object oriented (OO) or not, or it may have both kinds 
of interfaces available.  There are pros and cons of each technique, which 
should be considered when you design your API.

In I<Perl Best Practices> (copyright 2004, Published by O'Reilly Media, Inc.),
Damian Conway provides a list of criteria to use when deciding if OO is the
right fit for your problem:

=over 4

=item *

The system being designed is large, or is likely to become large.

=item *

The data can be aggregated into obvious structures, especially if
there's a large amount of data in each aggregate.

=item *

The various types of data aggregate form a natural hierarchy that
facilitates the use of inheritance and polymorphism.

=item *

You have a piece of data on which many different operations are
applied.

=item *

You need to perform the same general operations on related types of
data, but with slight variations depending on the specific type of data
the operations are applied to.

=item *

It's likely you'll have to add new data types later.

=item *

The typical interactions between pieces of data are best represented by
operators.

=item *

The implementation of individual components of the system is likely to
change over time.

=item *

The system design is already object-oriented.

=item *

Large numbers of other programmers will be using your code modules.

=back

Think carefully about whether OO is appropriate for your module.
Gratuitous object orientation results in complex APIs which are
difficult for the average module user to understand or use.

=head2 Designing your API

Your interfaces should be understandable by an average Perl programmer.  
The following guidelines may help you judge whether your API is
sufficiently straightforward:

=over 4

=item Write simple routines to do simple things.

It's better to have numerous simple routines than a few monolithic ones.
If your routine changes its behaviour significantly based on its
arguments, it's a sign that you should have two (or more) separate
routines.

=item Separate functionality from output.

Return your results in the most generic form possible and allow the user 
to choose how to use them.  The most generic form possible is usually a
Perl data structure which can then be used to generate a text report,
HTML, XML, a database query, or whatever else your users require.

If your routine iterates through some kind of list (such as a list of
files, or records in a database) you may consider providing a callback
so that users can manipulate each element of the list in turn.
File::Find provides an example of this with its 
C<find(\&wanted, $dir)> syntax.

=item Provide sensible shortcuts and defaults.

Don't require every module user to jump through the same hoops to achieve a
simple result.  You can always include optional parameters or routines for 
more complex or non-standard behaviour.  If most of your users have to
type a few almost identical lines of code when they start using your
module, it's a sign that you should have made that behaviour a default.
Another good indicator that you should use defaults is if most of your 
users call your routines with the same arguments.

=item Naming conventions

Your naming should be consistent.  For instance, it's better to have:

display_day();
	display_week();
	display_year();

than

display_day();
	week_display();
	show_year();

This applies equally to method names, parameter names, and anything else
which is visible to the user (and most things that aren't!)

=item Parameter passing

Use named parameters.  It's easier to use a hash like this:

$obj->do_something(
	    name => "wibble",
	    type => "text",
	    size => 1024,
    );

... than to have a long list of unnamed parameters like this:

$obj->do_something("wibble", "text", 1024);

While the list of arguments might work fine for one, two or even three
arguments, any more arguments become hard for the module user to
remember, and hard for the module author to manage.  If you want to add
a new parameter you will have to add it to the end of the list for
backward compatibility, and this will probably make your list order
unintuitive.  Also, if many elements may be undefined you may see the
following unattractive method calls:

$obj->do_something(undef, undef, undef, undef, undef, 1024);

Provide sensible defaults for parameters which have them.  Don't make
your users specify parameters which will almost always be the same.

The issue of whether to pass the arguments in a hash or a hashref is
largely a matter of personal style.

The use of hash keys starting with a hyphen (C<-name>) or entirely in 
upper case (C<NAME>) is a relic of older versions of Perl in which
ordinary lower case strings were not handled correctly by the C<=E<gt>>
operator.  While some modules retain uppercase or hyphenated argument
keys for historical reasons or as a matter of personal style, most new
modules should use simple lower case keys.  Whatever you choose, be
consistent!

=back

=head2 Strictness and warnings

Your module should run successfully under the strict pragma and should
run without generating any warnings.  Your module should also handle 
taint-checking where appropriate, though this can cause difficulties in
many cases.

=head2 Backwards compatibility

Modules which are "stable" should not break backwards compatibility
without at least a long transition phase and a major change in version
number.

=head2 Error handling and messages

When your module encounters an error it should do one or more of:

=over 4

=item *

Return an undefined value.

=item *

set C<$Module::errstr> or similar (C<errstr> is a common name used by
DBI and other popular modules; if you choose something else, be sure to
document it clearly).

=item *

C<warn()> or C<carp()> a message to STDERR.

=item *

C<croak()> only when your module absolutely cannot figure out what to
do.  (C<croak()> is a better version of C<die()> for use within 
modules, which reports its errors from the perspective of the caller.  
See L<Carp> for details of C<croak()>, C<carp()> and other useful
routines.)

=item *

As an alternative to the above, you may prefer to throw exceptions using 
the Error module.

=back

Configurable error handling can be very useful to your users.  Consider
offering a choice of levels for warning and debug messages, an option to
send messages to a separate file, a way to specify an error-handling
routine, or other such features.  Be sure to default all these options
to the commonest use.

=head1 DOCUMENTING YOUR MODULE

=head2 POD

Your module should include documentation aimed at Perl developers.
You should use Perl's "plain old documentation" (POD) for your general 
technical documentation, though you may wish to write additional
documentation (white papers, tutorials, etc) in some other format.  
You need to cover the following subjects:

=over 4

=item *

A synopsis of the common uses of the module

=item *

The purpose, scope and target applications of your module

=item *

Use of each publically accessible method or subroutine, including
parameters and return values

=item *

Examples of use

=item *

Sources of further information

=item *

A contact email address for the author/maintainer

=back

The level of detail in Perl module documentation generally goes from
less detailed to more detailed.  Your SYNOPSIS section should contain a
minimal example of use (perhaps as little as one line of code; skip the
unusual use cases or anything not needed by most users); the
DESCRIPTION should describe your module in broad terms, generally in
just a few paragraphs; more detail of the module's routines or methods,
lengthy code examples, or other in-depth material should be given in 
subsequent sections.

Ideally, someone who's slightly familiar with your module should be able
to refresh their memory without hitting "page down".  As your reader
continues through the document, they should receive a progressively
greater amount of knowledge.

The recommended order of sections in Perl module documentation is:

=over 4

=item *

NAME

=item *

SYNOPSIS

=item *

DESCRIPTION

=item *

One or more sections or subsections giving greater detail of available 
methods and routines and any other relevant information.

=item *

BUGS/CAVEATS/etc

=item *

AUTHOR

=item *